Electronic Overload Relay Manufacturer in India

images

Every motor must be protected from all possible faults to ensure prolonged and safe operation as well as time loss caused due to breakdown. Almost all the industries rely on the electric motor to control its processes and production. Hence it is necessary to make the motor fail-safe.

What is trip Class of overload relay?

The time taken by them to open the contactor during overloads is specified by the trip class. It is commonly classified into Class 10, Class 20, Class 30 and Class 5. The OLR trips in 10 seconds, 20 seconds, 30 seconds and 5 seconds respectively at 600% of full load current to the motor. Class 10 and Class 20 are very commonly used ones. Class 30 overload relay are used for protection of motors driving high inertia loads and Class 5 relay are used for the motors requiring very fast tripping.

1.058 * Ir 1.2 * Ir 1.5 * Ir 7.2 * Ir
Class Time to trip from a cold start
10A >hr <2hr <2min 2s
10 >2hr <2hr <4min 2s
20 >2hr <2hr 8min 2s
30 >2hr <2hr <12min 2s

What causes the OLR trip?

As discussed above, there are three major conditions for overload trips:

  • Overloading of the motor.
  • Input phase loss
  • Phase imbalance.
  • Apart from these, there may be some additional protection feature available. This varies from one manufacturer to the other.

    How does an overload relay protect from phase failures?

    During normal operation, the current flowing through each pole of an overload relay to the motor remains the same at a time. If anyone of the phase is interrupted, the current through the other two phases rises to 1.73 times the normal value. Hence the overload relay gets heated up and it trips. Phase failure is also known as single phasing of motoror phase loss.

    Can OLR protect from short circuits?

    Overload relay cannot protect against short circuits. They should always be used with short circuit protection devices. Otherwise, any short circuits in the motor can potentially damage them. They can protect against overloads, phase loss, and phase imbalance, but not short circuits.

    Summary

    Overload relay is a device that can protect a motor from overloads, phase failure and phase imbalances. Based on the principle of operation they are classified into thermal and electronic overload relay.Thermal OLRis based on the principle of deformation of a bimetallic strip on heating and the electronic overload relay is a microprocessor-based device.

Service Area

1 - Electronic Overload Relay Manufacturer in Delhi

2 - Electronic Overload Relay Manufacturer in Gurgaon

3 - Electronic Overload Relay Manufacturer in Noida

4 - Electronic Overload Relay Manufacturer in Faridabad

5 - Electronic Overload Relay Manufacturer in Ghaziabad

6 - Electronic Overload Relay Manufacturer in Ahemdabad

7 - Electronic Overload Relay Manufacturer in Bangalore

8 - Electronic Overload Relay Manufacturer in Vardodara

9 - Electronic Overload Relay Manufacturer in Andhra Pradesh

10 - Electronic Overload Relay Manufacturer in Arunachal Pradesh

11 - Electronic Overload Relay Manufacturer in Assam

12 - Electronic Overload Relay Manufacturer in Visakhapatnam

13 - Electronic Overload Relay Manufacturer in Chennai

14 - Electronic Overload Relay Manufacturer in Dhanbad

15 - Electronic Overload Relay Manufacturer in Indore

16 - Electronic Overload Relay Manufacturer in Jaipur

17 - Electronic Overload Relay Manufacturer in Kanpur

18 - Electronic Overload Relay Manufacturer in Kolkata

19 - Electronic Overload Relay Manufacturer in Lucknow

20 - Electronic Overload Relay Manufacturer in Chandigarh

21 - Electronic Overload Relay Manufacturer in Bahadurgarh

22 - Electronic Overload Relay Manufacturer in Manesar

23 - Electronic Overload Relay Manufacturer in Sikkim

24 - Electronic Overload Relay Manufacturer in Tripura

25 - Electronic Overload Relay Manufacturer in Ludhiana

26 - Electronic Overload Relay Manufacturer in Mumbai

27 - Electronic Overload Relay Manufacturer in Nagpur

28 - Electronic Overload Relay Manufacturer in Nashik

29 - Electronic Overload Relay Manufacturer in Patna

30 - Electronic Overload Relay Manufacturer in Pune

31 - Electronic Overload Relay Manufacturer in Rajkot

32 - Electronic Overload Relay Manufacturer in Hyderabad

33 - Electronic Overload Relay Manufacturer in Guwahati

34 - Electronic Overload Relay Manufacturer in Gandhi Nagar

35 - Electronic Overload Relay Manufacturer in Durgapur

36 - Electronic Overload Relay Manufacturer in Chhattisgarh

37 - Electronic Overload Relay Manufacturer in Goa